Zero Moustique CHLJ-A003 Manual De Instrucciones página 15

USE
Before first use :
Before using the swatter for the first time, please ensure that it is fully
charged. When charging the swatter, make sure the switch is in the "OFF"
position.
A red light indicates that the swatter is charging and once it is fully
charged a green light will come on. The swatter is fully charged after 4 to
6 hours.
To activate the swatter :
Slide the power switch to "ON1". Then press the activation button above
the power switch, a red light will come on. The swatter is ready for use.
Wave the swatter at the mosquito. An electric light confirms that the
swatter has made contact with the insect.
Release the activation button and slide the switch to the "OFF" position.
To turn on the LED :
Slide the power switch to "ON2".
To activate the swatter and the LED simultaneously :
Slide the power switch to "ON2" and the activation button. The swatter is
ready for use. Wave the swatter at the mosquito. An electric light confirms
that the swatter has made contact with the insect.
Release the activation button and slide the switch to the "OFF" position.
CAUTION: After use, make sure the power switch is in the "OFF"
position. DO NOT TOUCH the metal net for 5 seconds after the
swatter has been switched off.