Cue Output - Solidyne HL 202 Manual De Usuario

ENGLISH

2.4.5 CUE output

This output present the audio signal of HOLD lines, in order to the journalist can notice to the
operator when needed airing. This is the case of a sports transmission in which a reporter covering a
secondary match, wants to report that there was a goal in that game. If the operator has that line
Hold, the reporter has no way of giving notice, as the hybrid is in the air with the main relate, so
communication can not be established by the Talkback circuit.
To resolve this situation HL-202/203 has a
lines. Thus the operator is continually listening the Hold lines.
The output "MONITOR" uses a 1/8" jack to connect to a powered speaker or an external monitoring
input on the console (External (Audicom) CUE in Solidyne consoles).

In addition to the audio of the lines in Hold, is normal to hear an audio remnant of on-air
lines. When HL202 units are connected in cascade, CUE outputs remains independent. Each
unit presents its CUE audio output, correspondent to lines connected to that hybrid. If you
have only one monitor speaker for all lines, you can connect CUE outputs in parallel.
TELEPHONE HYBRIDS
"MONITOR" output, which present audio from all HOLD
Page 27
HL202 & 203VQ