Ecler NXA Serie Manual De Instrucciones página 5

Ocultar thumbs Ver también para NXA Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

RS-232 Interface
TP-NET external remote control protocol, via Ethernet and RS-232 (compatible with Crestron®,
AMX®, RTI®, VITY®, etc..)
POWER ON / OFF button and / or front panel volume controls can be deactivated by software,
preventing unauthorized tampering
Front panel volume controls are assignable to one or more audio inputs or one or more amplified
outputs
Self-diagnosis function for correct operation of the amplifier, with FAULT relay: allows the device failure
detector to switch to an external redundant system
Integrated "Anti-clip" system
Rack format (2RU)
Integrated DSP processor, configurable from EclerNet Manager. Main functions:
Each channel has a dedicated audio input mixer that enables you to generate a separate mix
o
from the ones made in the other channels
Independent controls per channel: VOLUME, MUTE, SOLO, PHASE INVERSION, MAX. VOL
o
(upper volume limit) and MIN. VOL (lower volume limit)
LP and HP crossover filters, up to 4th order, per channel
o
Bank of 8 parametric EQ filters, per channel
o
Compressor with THRESHOLD, COMP. RATIO, ATTACK, RELEASE, KNEE and MAKE-UP
o
GAIN settings, per channel
Delay, up to 1000 milliseconds, per channel
o
DUCKER function (priority): an input can be configured with highest priority, being able to
o
reduce and replace the audio content of any channel, when its signal exceeds the detection
threshold. This feature is vital in emergency / evacuation systems, which should play a specific
alarm message and / or evacuation instead of the regular audio program when detecting an
emergency scenario
5 configuration memories (presets) are available
o
* EclerNet Manager software is available on www.ecler.com.
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Nxa4-80Nxa4-200Nxa4-400Nxa4-700Nxa6-80Nxa6-200

Tabla de contenido