Noble Flame RAGNA Manual De Instalacion Y Uso página 18

Specification
The gas heater is designed to work with the following gas types.
Gas
categories:
Type of
gas:
Gas
pressure:
Total heat
input:
Injector
size:
Note: Injector marking 1.32 means that the injector size is 1.32mm.
PIN:
WARNING: Accessible parts may be very hot. Keep young children away.
Read the instructions before using this appliance. The appliance must be
installed in accordance with the instructions and local regulations
Close the valve of the gas cylinder or the regulator after use.
The use of this appliance in enclosed areas can be dangerous and is
PROHIBITED.
For use outdoors or in amply ventilated areas.
An amply ventilated area must have a minimum of 25 % of the surface area open. The
surface area is the sum of the walls surface.
`
I
3+
Butane / Propane
Butane: 28 – 30 mbar
Propane: 37 mbar
7.3 kW (G30:531 g/h
G31:522 g/h)
1.32 mm
（Pilot: 0.25 mm）
0063DM7956
I
3B/P(30)
LPG mixtures
28-30 mbar
7.3 kW (531 g/h)
1.32 mm
（Pilot: 0.25mm）
I
3B/P(50)
LPG mixtures
50 mbar
7.3 kW (531 g/h)
1.18 mm
（Pilot: 0.18mm）