Cleaning & Maintenance
⚫ Ensure all cleaning is done whilst the fireplace is turned off and fully cooled down.
⚫ Wipe surfaces with a soft, damp cloth.
⚫ Do not use any corrosive or combustible cleaning solutions.
⚫ Keep the outdoor fireplace covered when not in use to stop rain from blocking the burner jets.
⚫ Make sure burner is kept clean and clear of combustible materials and dirt.
⚫ Soot can build up on the glass beads, lava rocks and ceramics logs. This could block burner jets
so remove the fuel bed and wipe with damp cloth to clean soot.
⚫ Soot can build up on the surrounding safety glass. Carefully remove the glass from glass bracket
with relative screwdriver, wipe soot with a soft, damp cloth, then carefully replace. Two people
maybe required disassembly and reassembly of the surrounding safety glass.
⚫ Ensure the condition of gas hose is suitable and shows no signs of cracking or general wear &
tear.
⚫ It is advised to get the appliance check by a qualified technician every 3 years.
⚫ If the burner jets do get blocked by soot or other dirt then remove the fuel bed and use a pin or
paperclip. Ensure the burner is switched off.
⚫ Follow the above maintenance steps on a regular basis.
`