Attaching The Holder; Warranty Disclaimer - Hama 00201512 Instrucciones De Uso

4. Installation
Note
Never apply force when using the product or during installation.

4.1 Attaching the holder

• Remove the protective film from the suction cup and position it on a clean and flat surface (e.g. window
pane).
• If the suction cup holder is to be attached to a rough or uneven surface, an adapter plate is optionally
available.
• Turn the base of the holder (1) clockwise to attach the suction cup.
• Open the clamping device (2) to position the carrying arm.
• Close the clamping device to lock this position.
• To detach the suction cup from the surface, turn the base of the holder anticlockwise. Then gently pull the
flap to completely release the suction cup. (3)
4.2 Mounting the holder
• Set the recess or recesses of the holder onto the bracket.
• Move the holder up or down until it clicks into place or is seated firmly.
Note
Always take your terminal device out of the holder before attaching or removing the bracket (suction cup
holder).
4.3 Adhesive pad (magnetic)
Note – Adhesive surface
• Ensure that the mounting surface to which the adhesive pad is to attach (such as the back of a mobile
phone, GPS navigation system, etc.) is free of dust and grease. Use a suitable cleaning agent from a
specialised dealer to clean the surface.
• Various environmental factors such as ambient humidity, sunlight or cold can impair the durability of
the adhesive pad.
• We cannot guarantee that residue will not be left on the mounting surface after the adhesive pad is
removed.
• Remove the protective foil from the adhesive side of the magnetic pad, and press the pad onto the
adherend surface (for example, rear of mobile phone) for a few seconds.
• The round magnetic pad can simply be inserted between the protective cover and the back of the mobile
phone.
5. Care and maintenance
Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners.

6. Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper
installation/mounting, improper use of the pro
7