Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
USE & OPERATION
CONTROL PANEL
FUNCTION BUTTONS
POWER
Press the POWER button to turn the unit on. The cooler will start automatically at medium speed. After
a few seconds the speed will switch to low. Once the unit is switched on, the Ionizer is automatically
activated. The ionizer causes the particles in the air to become heavier and fall to the floor, so the unit
will expel cleaner and fresher air.
SWING
Press the SWING button until the SWING indicator light is illuminated on the control
panel. The louvers will begin to move left to right automatically.
Vertical Air Flow - You can manually adjust the louvers to change vertical air flow.
TIMER
Press the TIMER button until the desired time duration setting is selected. When the set time has
passed, the unit will automatically turn off (unit remains in Standby mode until power cord is unplugged
from electrical socket). The TIMER function allows you to program the unit for up to 7.5 hours of use.
SPEED
Press the SPEED button repeatedly to change the speed between III (High) - II (Medium) - I (Low).
2
Louver Movement
EN
Publicidad
Tabla de contenido
