ECRON ES 287 Manual De Usuario página 35

pull the cable to remove the plug from the socket; to do this,
always hold the plug and pull.
· Do not let the cable touch hot surfaces. Allow the iron to
cool completely before storing. When storing the iron, wind
the cable up without making it too tight.
· Always disconnect the iron from the power supply when
filling it with water or emptying it, and when not in use.
· Do not switch the iron on if the cable is damaged and if the
iron has fallen or is damaged. To avoid the risk of electric
shock, do not disassemble the iron. Take it to a service centre
to have it checked and repaired. Reassembling it incorrectly
risks causing an electric shock when using the iron.
· Extreme caution is required in the event that iron is used
by or near children. Do not leave the iron unattended when
EN
plugged in or when on the ironing board.
· Burns may result if the hot metal part, hot water or steam
comes into contact with skin. Take care when placing the
iron face down as there is hot water in the water tank.
· If the malfunction light turns on, the iron is not
functioning normally. Unplug the from the power supply
and take the iron to be repaired by a technically qualified
professional.
· Use the iron on a flat, stable surface. When the iron is
placed on its base, ensure that the surface on which it is
35