Ironing With Steam - ECRON ES 287 Manual De Usuario

INSTRUCTIONS FOR USE
When using the iron for the first
time, it is possible that a small
amount of smoke appears or that
sounds are made relating to
expanding plastic. This is very
normal and will disappear after a
short time. We also remind you to
run the iron over plain cloth before
using for the first time.
PREPARATION
Sort the clothes that you are going
to iron according to the international
symbols on the label or, if there is
no label, according to the type of
fabric.
GARMENT TYPE OF
LABEL FABRIC
synthetic
silk-wool
cotton-linen
38
HEAT SETTING
●
low temperature
●●
medium temperature
●●●
high temperature
Do not iron
Start by ironing items of clothing that
require a low temperature.
This reduces the waiting time (the iron
takes less time to heat up than to cool)
eliminating the risk of burning the
fabric.

IRONING WITH STEAM

Filling the tank
· Ensure that the plug has been
removed from the power socket.
· Move the steam regulator D to " "
[Fig. 5].
· Open the water tank cover C.
· Raise the point of the iron to
enable the water to be poured in
without spilling [Fig. 1].
· Slowly pour water into the tank
using the measuring gauge and
ensure that you don't exceed the max
level (300ml) indicated by "MAX" on
the tank.
· Close the water tank cover C.
Selecting the temperature
· Place the iron down in a vertical
position.
· Plug it into the power socket.
· Adjust the temperature dial
according to the international symbol
on the garment label [Fig. 3]. The
on-indicator light H indicates that