Blanco MASTER-S Profi HD Instrucciones De Montaje Y Mantenimiento página 3

Installation and care instructions
GB
We have put together the most important product information
to enable you to benefit from the high degree of functionality and the
first class comfort provided by BLANCO taps.
Parts list BLANCOMASTER-S Profi HD
1 Lever
2 Screw cover +
Fixing screw
Cartridge retaining ring
3
Cartridge
4
Connection pipe
5
O-rings connection pipe
6
Spout retaining screw
7
8 Fixing kit
9 Flexi hose, 1 pair
10 Valve
11 Lever spout
Spout
12
Flow Straighter
13
14 O-rings
Ring spout
15
Stabilisation triangle
16
17 Disc wall attachment
18 Wall attachment
19 Bar wall attachment
20 Attachment shower
Screw shower attachment
21
Spray hose
22
Spring
23
Sleeve spring
24
25 Shower head
26 Non-return valve
27 Spray hose seal
Technical data
Use
• Pressurised hot water tank and instantaneous
water heater
• Not suitable for low pressure hot water tank/hot
water tank
Operating pressure
• Min. 0.5 bar • Max. 10.0 bar
Temperature
• Max. 70° C
Note
pressure differences between cold and warm water
connection should be less than 3 bar otherwise the
mixing ratio deviates from the lever position.
Symbols
right wrong
Installation
Illustrations
1 Tap hole: 35 mm
2 -
Flush the pipe work to remove foreign debris
8
from the system. When the tap has been
connected check for leaks,movement and flow
rate/pattern.
9 Recommendation: fit dirt filter
10 - 14
further illustrations on the back fold-out flap
Rinse perlator/ jet regulator
15
When tap has been fitted check:
tightness, movement, full jet of water
Attention!
After using the mixer, close main lever
Care
Please note the following advice and the
illustrations on the back fold-out flap.
Illustrations
16 - 18
19 - 20
-
21 24
-
25 27
Important
in the event of a query, please enter the 11-digit
Article Number (see wrapper on the cold water hose
of your tap) .
Example
recommended
th is B L A N C O
7 Attach tap
NOTE: don't forget the seal between tap
and supporting surface!
Connect flexi hoses
Use soft (microfibre) cloth and mild cleaning
agent
Take care with hard objects
Using the hose spray
Cleaning the perlator/ jet regulator with
vinegar
n s o n b u y in g
C o n g ra tu la ti o
e y o u
ta p – w e h o p
w it h it !
a re d e li g h te d
1 .
2