Cleaning And Maintenance - PALSON Panini Modo De Empleo

All manuals and user guides at all-guides.com
5. When not using the toaster, switch it off by disconnecting it from the power supply. Do not roll the power cord around
the toaster during or after use. Use the cord storage in the base of the appliance.
THE CANCEL FUNCTION
Press this button (5) if you wish to stop the toaster operating.
THE DEFROST FUNCTION
To toast frozen bread, do not adjust the browning control, just put the bread in the slot as normal, push the lever down
and press the defrost button (3).
The defrosting indicator light will light up and the toaster will operate for longer.
THE REHEAT FUNCTION
If the bread has already been toasted but has gone cold, you need only put the bread in the slot, press the level down
and immediately press the reheat button (4). The indicator light will come on and the toaster will operate for a short period
in order to reheat the bread.
THE CRUMB TRAY
Crumbs will gradually gather in the tray at the bottom of the toaster (1) and could catch fire if it is not emptied periodically.
When the toaster is completely cold, shake the toaster gently from side to side to remove any remaining crumbs that
may have remained inside the toaster body. Then pull out the tray and empty it. Never use the toaster without the tray
in position.
ADVICE
Dry bread toasts more quickly than moist bread. Take care when selecting the time during which the bread is to be
toasted. Make sure that the slices are not too thick so that they do not burn or get stuck in the toaster slot. Wait until the
toaster is completely cold before leaving it unsupervised.
USING THE WARMING RACK
Position the accessory on the upper part of the toaster and make sure that it is firmly fixed in place. Select the required
duration of heating by turning the browning control (6). Press down the lever (7) until it stops. Wait until the toaster
switches off automatically before removing the rolls. Take care not to touch any metal parts as they may be hot.

CLEANING AND MAINTENANCE

After using the toaster and before cleaning it unplug it from the power supply and wait until it is cold.
Clean the outside of the toaster with a damp cloth and dry it afterwards.
Never use metal scouring pads or abrasive cleaners and never submerge the toaster in any kind of liquid.
Never use pointed or sharp objects to clean the inside as you could damage the heating elements.
Never put brushes, scissors or metal objects in the slot of the toaster.
Thank you for showing your trust in us by choosing one of our products.
7