Power On/Off - Trevi XF 150 KB Guía De Uso

POWER ON/OFF

1. Turn the switch (1) to the ON position to turn on the appliance.
2. Turn the switch (1) to the OFF position to switch off the appliance.
VOLUME ADJUSTMENT - EQ FUNCTION
- Use the VOL + and VOL - buttons (7) to adjust the volume;
- There are five different EQ modes. Press EQ button (6) to switch between different
EQ modes, such as Normal/ Pop/ Rock/ Jazz/ Country
FM RADIO

Press /SCAN button (11) to search FM channels automatically.
This operation will scan all FM stations and Pre-record them to memory.
The scan procedure will take several minutes and cannot be interrupted.
Once completed, press
track, press VOL+ or VOL - button (7) to increase or decrease the Volume.
BLUETOOTH
PAIRING
1. Place the speaker near the Bluetooth device to be paired and turn on the device;
2. Using the MODE button (10) select the Bluetooth function, you will hear a noti-
fication sound;
3. Follow the instructions of your external device to search for devices;
4. Search for the speaker named "XF150KB" and enter the PIN "0000" if requested;
5. After pairing, you will hear a notification sound.
Note: The Bluetooth speaker only works with one connection at a time.
CONTROLS AVAILABLE IN BLUETOOTH MODE
9
- Press button (8) once to go to the previous track; press
to go to the next track.

- Press /SCAN button (11) to pause; press it again to restart playback.
TWS
Two the same model speakers can be connected to one wireless device at the
same time. First, turn the speakers on, then choose one unit and long press its
MODE button (10) for several seconds; then you will hear the sound of "Ding" to
indicate that the two units have paired successfully. Please ensure before pairing
that the two units are not connected with other devices.
10
9 :
button (8) or button (9) to be previous track or next
:
button (9) once