Addenda; Troubleshooting - AIPTEK HDDV 8000 Manual

Troubleshooting

When using the camera:
Problem
The camera can not be
powered on normally.
The camera is still powered
on, but the LCD screen does
not display.
Can not take pictures or
video clips when pressing
the Shutter or Record
button.
LCD icon error after
instering a memory card.
1. The CF card cannot be
identified by the camera.
2. The LCD screen displays
"MEMORY ERROR" or
"CARD ERROR" message.
All manuals and user guides at all-guides.com

Addenda

Cause
The batteries are out of
power.
The batteries are incorrectly
installed.
Low quality batteries are
used.
If the camera stays idle for
over one minute, the LCD
screen will automatically shut
down to save power.
The LCD display is disabled.
The TV Out function is
enabled.
Out of memory.
The camera is recharging the
flash strobe.
The card is not correctly
inserted.
The format of the memory
card is not compatible with
the camera.
The memory card is
corrupted.
40
Solution
Replace the batteries.
Re-install the batteries.
Use alkaline or rechargeable NiMH
batteries. DO NOT use different
brands or types of batteries at the
same time.
Press any button except the power
button to reactivate the display.
Press the Enter button to
switch on the display.
Turn off the camera and then turn
it on again.
Free some space from the memory
card or the internal memory.
Wait until the flash strobe is fully
charged.
Remove the card and insert it in
correct direction.
Use the camera "Format" function to
format the card.
Replace the memory card with a
new one.