Porter Cable PGN350 Manual De Instrucciones página 4

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

All manuals and user guides at all-guides.com
RISK OF ELECTROCUTION AND FIRE
(Continued)
HAZARD
Operation of
Water is an excellent conductor
generator in rain,
of electricity! Water which comes
wet, icy, or
in contact with electrically
flooded
charged components can
conditions.
transmit electricity to the frame
and other surfaces, resulting in
electrical shock to anyone con-
tacting them.
Use of worn,
Contact with worn or damaged
damaged, under-
extension cords could result in
sized or un-
electrocution.
grounded exten-
Use of undersize extension
sion cords.
cords could result in overheating
of the wires or attached items,
resulting in fire.
Use of ungrounded cordsets
could prevent operation of
circuit breakers and result in
electrical shock.
Placing generator
Accidental leakage of electrical
on or against
current could charge conductive
highly conductive
surfaces in contact with the
surface, such as a
generator.
steel walkway or
metal roof.
Exceeding the load capacity of
Improper
the generator by attaching too
connection of
many items, or items with very
items to
high load ratings to it could
generator.
result in overheating of some
items or their attachment wiring
resulting in fire or electrical
shock.
Operation of unit
Attempting to use the unit
when damaged,
when it has been damaged, or
or with guards or
when it is not functioning
panels removed.
normally could result in fire or
electrocution.
Removal of guarding could
expose electrically charged
components and result in
electrocution.
D28733
WHAT CAN HAPPEN
4- ENG
HOW TO PREVENT IT
Operate generator in a clean, dry,
well ventilated area. Make sure
hands are dry before touching
unit.
Inspect extension cords before
use and replace with new cord if
required.
Use proper size (wire gauge)
cordset for application see chart
in the Assembly section of this
manual.
Always use a cordset having a
grounding wire with an
appropriate grounding plug. DO
NOT use an ungrounded plug.
Place generator on low conduc-
tivity surface such as a concrete
slab.
ALWAYS operate generator a
minimum of six feet from any
conductive surface.
Read the load rating chart and
instructions in the Wattage Cal-
culation section. Make sure that
the summation of electrical
loads for all attachments does
not exceed the load rating of the
generator.
Do not operate generator with
mechanical or electrical
problem. Have unit repaired by
an Authorized Service Center.
Do not operate generator with
protective guarding removed.

Publicidad

Tabla de contenido
loading

Tabla de contenido