Macma Smart Band Manual De Instrucciones página 8

when sleep so as to record your sleep data
FAQ
Why no notfication after enabling it?
Android users: Make sure band connect with phone. Then, open privilege and allow it
to access Incoming Call, Message and Contacts at Settings in running backstage. If
any security APP installed, add DayDayBand to trust. iOS users: No notification even
connected, please reboot the phone and connect again. Then click Pair after Bluetooth
Pairing Request.
Why some bands will display AM/PM but some not?
It's determined by time format of users' phone.
AM/PM will display if users' phone use 12-hour format.
AM/PM will not display if users' phone use 24-hour format.
Why does it unworkable when I use Shake and Photograph?
When entering Shake and Photograph, please allow APP to access your camera.
Basic Parameters
Band type: Smart band
Host weight: 23g
Battery capacity: 60mAh
Working temperature: -10°C – 50°C
Band lenght: 240 mm
Wrist clasp material: Aluminium alloy
Safety Notice
1. Don't wear the band when shower or swimming.
2. Please connect band when sync data.
3. Use the built-in charging line for charging.
4. Don't exposure the band in higher moisture or extremley low temperature.
5. When band crashes, check phone's memory sufficient and service close or not
and then restart your phone and try again.
Components Introduction
*Host, *The silicone, *Charging line, *Packaging and instructions
Battery type: Lithium polymer
Sync way: Bluetooth 4.0
Waterproof grade: IP66
Show mode: 0.49 inch OLED
Wrist Strap material: The silicone