SPM SUPERCOLD 12 LT Manual De Instrucciones página 20

- To reassemble the tap, proceed as follows (fig. 6,7 and 8):
- place the ferrule (H) in the upper part;
- in the lower part place the spring (G) and the toothed
washer (F) pushing the washer upward while screwing it
clockwise.
- To reassemble he mixing blade (C) place it on its rotating
shaft, without exerting too much pressure.
- To reassemble the bowl (A), moisten the bowl gasket with
water, then press it down on the upper part, using both
hands, so that it is completely aligned in place.
- To remove the liquid drip tray, slightly lift the front part,
then pull it outward (fig. 9).
All manuals and user guides at all-guides.com
Fig. 6
Fig. 7
Fig. 8
Fig. 9
19