Book Card Care - Franklin BOOKMAN BES-2019 Manual Del Usuario

Book Card Care

• Do not touch the metal
contacts on the book cards.
Caution: Touching these electrical con-
tacts with statically charged objects, in-
cluding your fingers, could erase
information entered in a book card or built-
in book.
• Do not put excessive pressure
on the book cards.
• Do not expose the book cards
to heat, cold, or liquids.
Resetting BOOKMAN
If the BOOKMAN keyboard fails to re-
spond, or if its screen performs erratically,
first press
CLEAR
twice. If nothing happens, follow the steps
below to reset it.
Warning: Pressing the reset button with
more than very light pressure may perma-
nently disable your BOOKMAN. In addition,
resetting BOOKMAN erases settings and
information entered into its built-in book, and
in an installed book card.
1. Hold
CLEAR
If nothing happens, try Step 2.
2. Use a paper clip to gently press
BOOKMAN's reset button.
The reset button is recessed in a pin-sized
hole on the back of BOOKMAN. Look for
it on the battery cover or near the book
card slot.
Troubleshooting BOOKMAN
• Make sure your book card, if any, is
installed correctly.
• Check that the book card's metal
contacts are dirt-and dust-free.
18
and then press
and press
ON/OFF
ON/OFF
.