Installing Book Cards & Selecting Books - Franklin BOOKMAN BES-2019 Manual Del Usuario

Installing Book Cards
Warning: Never install or remove a book
card when BOOKMAN is on. If you do,
information that you entered in its built-in
book, and in an installed book card, will be
erased.
1. Turn BOOKMAN off.
2. Turn BOOKMAN over.
3. Align the tabs on the book card
with the notches in the slot.
4. Press the book card down until
it snaps into place.
Removing Book Cards
Warning: When you remove a book
card to install another, information that
you entered into the removed book card
will be erased.
Selecting Books
Once you have installed a book card in
your BOOKMAN, you must select which
book you want to use.
1. Turn BOOKMAN on.
2. Press
CARD
These are sample books.
3. Press or
book you want to use.
4. Press
ENTER
About Screen Illustrations
Some screen illustrations in this User's
Guide may differ from what you see on
screen. This does not mean that your
BOOKMAN is malfunctioning.
5
.
to highlight the
to select it.