Logitech PRO RACING WHEEL Manual Del Usuario página 5

2 RACING SEAT
2a Use the three bolt holes on the
underside of the PRO Racing wheel to
attach it to most major racing seats
– You will need 3 x M6X1 bolts
(not included) with a maximum
depth inside the wheel base of
15mm Remember to account for the
thickness of the surface that you are
attaching the wheel base to
– Using a longer bolt than this will
damage the wheel unit, so use
washers if needed to ensure that the
bolts do not encroach too far inside
the wheel base
– You only need to hand tighten
Do not use power tools to tighten
the bolts
2b You can use the included cover to fill
the clamp hole when attaching to
a racing seat
WARNING:
– Do not use the wheel rim as leverage
to assist you when getting into or out
of your racing seat as this will damage
your PRO Racing Wheel
2a
2b
5 ENGLISH
M6X1
T L
M6X1 L = T + 15MM