Hole Pattern; Putting Into Service; Maintenance - Eaton Ex ResistTel Instrucciones De Servicio

Hole pattern

Please use the following dimensions (in millimetre) for making a drilling
template:
The diameter of the hole depends on the screws used (max. screw
diameter 8 mm) and the type of the surface (steel, wood, concrete,
sheetrock etc.) and please select accordingly.

Putting into service

The ExResistTel MB phone is ready for operation immediately after
connecting it to the network.

Maintenance

The ExResistTel MB phone does not contain any components requiring
maintenance.
17