I Good Practices After Each Cleaning Operation - Polaris W Serie Manual De Instalacion Y Uso

2.6 I Good practices after each cleaning operation

2.6.1 Clean the filter as soon as the appliance is out of the pool
• The cleaner's performance may be reduced if the filter is full or dirty.
• Clean the filter in clean water as soon as the appliance is removed form the pool after each
cleaning cycle. Do not wait for the debris to dry.
• After each cleaning cycle, follow the steps for cleaning the filter, see "3.2 I Cleaning the filter as soon as the appliance
is out of the pool".
2.6.2 Lay out the cable to reduce tangling
The cleaner's behaviour is strongly impacted by the tangling of the cable. A cable that is correctly untangled will
guarantee better coverage of the pool.
• Untangle the cable and lay it out in the sun so that it returns to its original shape.
2.6.3 Store the cleaner and cable
• Place the cleaner vertically at the location provided on the trolley (depending on the model) for it to dry out quickly.
Roll up the cable carefully and place it on the trolley handle (see figure
• Store all elements away from direct sunlight, humidity, bad weather, and out of reach of any splashes. A protective
cover is available as an optional extra (see figure
Tip:
Even if you do not own a trolley, the cable must still be carefully arranged for storage. Once rolled up, the
cable can be placed on a wall mount for example.
).
).
EN
14