Measurement Of Resistance - Sofamel BTL-600 Manual De Instrucciones

7.5. Measurement of resistance

1. Turn the knob switch to
resistance measurement function, please press
"FUNC." key to switch to resistance measurement
function)
2. Connect the meter probes in parallel to the resistance
to be measured.
3. Reads the measurement results from the display.
Warning
To prevent possible electric shock, fire or personal injury, when
measuring current, first disconnect the power of the circuit to
be measured and fully discharge all high voltage capacitors.
After completing all measurement operations, disconnect the
meter probes from the circuit measured.
7.6. Measurement of connectivity
1. Turn the knob switch to the
"FUNC." key to switch to the connectivity function
2. Connect the meter probes in parallel to both ends of
the circuit to be measured. When the resistance value
of the measured circuit is lower than 50Ω, the buzzer
will make sound.
Warning
To prevent possible electric shock, fire or personal injury,
disconnect the power to the circuit to be measured and fully
discharge all high voltage capacitors before measuring diodes
or connectivity.
After completing all measurement operations, disconnect the
meter probes from the circuit measured.
nF shift, (if it is not
nF shift and press the
34