Wiseup U14 Manual Del Usuario página 3

All manuals and user guides at all-guides.com
3.3 CAMERA/STILL PHOTOGRAPHY
3.3.1 Power on the camera by pressing the power button for 3 seconds. The red indicator light
will flash once and then turn off. The blue indicator light will be solid on, Indicating the camera
has entered into standby mode.
3.3.2 Press the power button twice quickly to take a photo. The blue indicator light will flash
once, and the blue indicator light will be solid on, indicating that the camera is back to standby
mode again.
[Note]: image pixels: 2592x1944
IV. Video/Image Files Uploads
4.1 Power off the USB stick camera and plug it into a proper PC computer USB port directly.
4.2 Removable disk drive folder appears.
4.3 All the files can be accessed in the drive.
V. Setting Time/Date Stamp
5.1 Power off the USB stick camera and plug it into a proper PC computer USB port directly.
5.2 Removable disk drive folder appears.
5.3 Click on the drive in the root directory and inside root directory, open the txt file named
"time.txt".
5.4 Write the current date and time in the "time.txt" file with the correct format:YYYY-MM-DD
HH:MM:SS (For example: 2017-03-14 14:24:32). Save this file.
5.5 Restart the camera and the system will upgrade the program automatically.
VI. Charging
6.1 Power off the USB stick camera, and plug it into a computer USB port directly, or connect
it to AC outlet power supply using your DC 5V charger. The red indicator light will keep flashing
during the charging process.
6.2 It will take 1.5 hours to obtain a full charge.
6.3 When the camera is fully charged, the red indicator light will remain solid.
[Note]:
If the battery power is low, the red indicator light will flash 3 times and then turn off. The camera will
save all video files and then shut down automatically.