Power On/Off; Video Recording - Wiseup U14 Manual Del Usuario

All manuals and user guides at all-guides.com
III. Operation
>> Please make sure that the camera is fully charged before using.
>> Please make sure the Micro SD card has been formatted already and is securely fitted into
the camera's SD card slot, or it will not work. We recommend you use a micro SDHC class 10
memory card.
[Note]: If no Micro SD card is fitted into the camera and you try to power on the camera, the red
indicator light will flash 3 times and quickly flash twice and then turn off. The camera will shut down
automatically.

3.1 POWER ON/OFF

3.1.1 Power on the camera by pressing the power button for 3 seconds. The red indicator light
will flash once and then turn off. The blue indicator light will be solid on, Indicating the camera
has entered into standby mode.
3.1.2 Power off the camera by pressing the Power Button for 3 seconds in standby mode. The
red indicator light will flash twice and then turn off.
[Note]: The camera will shut down automatically if it is in standby mode without any operation more
than 1 minute.

3.2 VIDEO RECORDING

3.2.1 Power on the camera by pressing the power button for 3 seconds. The red indicator light
will flash once and then turn off. The blue indicator light will be solid on, Indicating the camera
has entered into standby mode.
3.2.2 Press the power button for 1 second to start video recording. The blue indicator light will
flash twice and then turn off. There is no indicator light during video recording process.
3.2.3 Press the power button for 1 second to stop video recording, the blue indicator light will
be solid on, indicating that the camera is back to standby mode again.
[
Note]:
1). A video clip will be generated and saved every 10 minutes automatically. Each video clip will take
up about 810MB storage space of the micro SD card.
2). The camera can record video for 55 minutes continuously on a full charge.
3). Video Resolution: 1920x1080 Video Format: AVI