auna PRO DJ-25 Manual De Instrucciones página 12

EN
1 MIC Connection
A microphone with 6.35 jack plug can be connected to this connection.
2 MIC Level Control
This control is to adjust the microphone volume.
3 Echo Vol Control
This control is to adjust the depth of echo.
4 Echo Repeat Control
Let you control the time period during which the echo is repeated.
5 Talkover
Press this button if you want to use your microphone. When the button
is pressed, all other signal sources will be attenuated by 14dB, so that the
microphone can be clearly heard. In the OFF position, all signals return to their
original level.
6 Phono/Line /USB Switch
Use this switch to select the input to be sent to the individual channel.
7 Gain Control
Use this knob to set the level of input channel.
8 Channel Fader
Used to adjust the level of each channel.
9 Crossfader
Allows seamless fading between channel 1 and channel 2.
10 Headphone Connection
A headphone can be connected to this socket for pre-listening.
11 Cue
Routes channel to meters and headphones for monitoring and cueing tracks.
12 PHONE LEVEL
Adjust the level of the phones level
13 Master Control
Adjust the overall output level
14 Master Level Display
Shows the level of the left and right master output
15 USB/SD Stick Socket
16 LED Display
Display for MP3's information.
12