auna PRO DJ-25 Manual De Instrucciones página 13

EN
17 USB Controls
Short press MODE to select the USB/SD/BT mode, and long press to turn on/
off the mode. Each time you press Play/Pause button, the operation changes
from play to Pause or from pause to play. Short press Repeat button to select
the repeat mode (all, one and random). Use [<<] button to re-start the track or
select the previous track. Use [>>] button to select the next track.
Back Panel
18 Power Switch
Turns the mixer on or off when the power supply is connected
19 AC Connection
Power supply with 110-240V AC.
20 Master Output
Master output connects to the main amplifier (DJ final mix after crossfader
section), accepts RCA jacks
21 SPAKER Output
Note: To avoid damage to the speakers, only use speakers that have the same
impedance and power rating as the amplifier. Only use speaker cables and
never signal cables as those used for microphones, music instruments and
audio equipment in general.
22 Phono/Line Inputs Sockets
These inputs, for ch1-ch2 and accept RCA-plug connectors. Use phono input
socket for phonograph turntables. Use line socket for CD/MP3 players. Line
level musical instruments with stereo outputs such as rhythm machines or
samplers should be connected with the line input socket.
13