Terratek TPDC18134 Manual Del Usuario página 9

18. REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in OFF
position before plugging in.
19. USE RECOMMENDED ACCESSORIES. Consult the owner's manual for recommended
accessories. The use of improper accessories may increase risk of injury.
20. MAKE SURE YOU USE THE CORRECT TOOL for the job you are doing.
21. NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the
cutting tool is unintentionally contacted.
22. CHECK DAMAGED PARTS. Before further use of the tool, damaged part(s), (i.e.,
guard) should be carefully checked to determine that it will operate properly and perform
its intended function. Check for alignment of moving parts, binding of moving parts,
breakage of parts, mounting and any other condition that may affect the tools operation.
A guard or other part that is damaged should be properly repaired or replaced.
23. Replace damaged blades/cutters immediately. DO NOT USE DAMAGED BLADES/
CUTTERS. They may cause bodily injury.
24. DIRECTION OF FEED. Feed work into the blade/cutter against the direction of rotation
of the blade/cutter only.
25. DO NOT ALTER THE PLUG OR USE A 2-PRONG RECEPTACLE. This tool is equipped
with a 3-prong electrical plug.
26. NEVER LEAVE TOOL RUNNING UNATTENDED. Turn power off. Don't leave tool until
it comes to a complete stop.
27. Double Insulated tools are equipped with a polarized plug (one blade is wider than the
other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a
polarized outlet. Do not change the plug in any way. Double Insulation eliminates the
need for the three wire grounded power cord and grounded power supply system.
This power tool is supplied with all the relevant safety guards and features, it should
be checked before every operation, this manual should be read and kept in a safe
place. Whilst we warn of all the possible risks attached to using power tools any operator
must have read and understood the manual and apply their own caution and common
sense when using this power tool.
Following this guide will greatly reduce your risk of electric shock or injury.
Only use qualified repair agents to service this power tool.
Only use qualified electrician to repair any damaged wiring.
NEVER remove the grounding prong from the power tool or extension cord.
Grounding Tools
Electrical Powered Connections
Grounding Instructions
Any electric powered tool that is marked "Ground Required", must be grounded. In the
event of a malfunction or breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. Any product that is equipped with an
electric cord having an equipment-grounding conductor and a grounding plug, the plug
must be plugged into a matching outlet that is properly installed and grounded in acco-
rdance with all local codes and ordinances.
Do not modify the plug provided. If it will not fit the outlet, have the proper outlet installed
by a qualified electrician.
All manuals and user guides at all-guides.com
6