Route Color—select the color of the route line.
Dim Roads—dim roads not on your route.
Map Data Fields—show and hide the data fields displayed on the
Map page. To customize the fields, select Wide or Thin and touch
Next. See the page 18.
Text Size—adjust the size of text on the map.
Zoom Level Detail—adjust the zoom level at which map items are
shown.
Detail Maps—disable and enable the detailed maps.
Changing the Navigation Settings
Press the MENU key > Settings > Navigation.
Vehicle—specify your vehicle type to optimize routes.
Preference—select a preference for route calculations.
Ask Preference—select whether the unit asks for your preference
each time it calculates a route.
Next Turn Pop-up—select when the Next Turn window appears.
Off-Route Recalculation—set the way the unit recalculates the
BMW Motorrad Navigator III Reference Guide
All manuals and user guides at all-guides.com
route. You can silence the "Off-Route, recalculating" message here.
Continuous Auto Routing—turn on or off Continuous Auto
Routing, which allows the Navigator III to continually search for
a better route to your destination. This can be useful if a traffic
accident occurs or there are time-restricted turns on the current
route. When Auto is selected, a
the unit has found a better route than the one you are currently
taking. Touch
Avoidance Setup—select road types, areas, and roads to avoid.
Adjusting the Traffic Settings
Press the MENU key > Settings > Traffic. Adjust the traffic
settings when you are using an FM TMC Traffic Receiver.
Changing the Screen Settings
Press the MENU key > Settings > Screen.
Brightness—select Manual Brightness and then touch
decrease the brightness of the backlight or
Calibrate Touch Screen—if you think the touch screen is not
responding properly, you can calibrate the screen. Use the optional
remote to access this setting if necessary.
C
BMW M
USTOMIZING THE
OTORRAD
is displayed on the map when
to take the better route.
to increase it.
N
III
AVIGATOR
E
N
to
EN-17