VOCO GIC Mixer Manual Del Usuario página 4

USER MANUAL
4) Time setting – Press the arrow up button to increase the mixing time (in seconds) and
the arrow down button to reduce the mixing time (in seconds).
5) Press the START button to begin the mixing process. The device stops automatically once
the set mixing time has elapsed. To interrupt the mixing process, press the START button
again.
6) Once mixing is complete, open the protective cover and remove the mixed capsule, which
can be used immediately. In order to fully lubricate the transmission mechanism of the
machine, it is recommended that the machine is run for 60 seconds without load for the
daily first use, so that the machine reaches its best operating condition. The mechanism is
pre-filled. Don't use additional lubricant.
5. Safety precautions and maintenance
1) Safety precautions
a) The four locking screws must be removed before the device is used for the first time.
b) Position the device on a flat surface with sufficient ventilation.
c) Ensure that the On / Off switch can be accessed easily and that the cable is connected
securely to the device.
d) Close the protective cover before starting the device using the START button. Allow
an adequate interval between multiple mixing processes so as to protect the device
against overheating.
e) The device is non-AP-type equipment and non-APG-type equipment
f) Please follow the instructions for use before using the device in order to prevent
damage to the device and personal injuries.
g) Do not position the mixer so that it is difficult to operate the disconnection device.
h) The power adapter is used to isolate the ME equipment from the mains supply.
i) Check the product labels and make sure that the product is properly connected
according to the user manual.
4