tti Tech TX-446 Manual De Instrucciones página 4

english
LED color
"RED"
Continuous
"GREEN"
Continuous
"GREEN"
"ORANGE"
Continuous
4. Microphone 4. Microphone
Hold the radio upright and speak to the microphone
clearly and slowly.
5. PTT (Push-to-Talk) Button 5. PTT (Push-to-Talk) Button
Hold the radio as you speak into the built-in
microphone.
After you have finished speaking, release the
PTT button to get back to the receiving mode.
6. Side Button 1 (Programmable) 6. Side Button 1 (Programmable)
7. Side Button 2 (Programmable) 7. Side Button 2 (Programmable)
There are two side buttons in your radio and
various features can be programmed and assigned
to each key by your dealer.
Please contact your dealer to know which features
are programmed and assigned for your side buttons.
The following describes how to press the side buttons:
• SHORT: click the button momentarily then release it.
• LONG: press the button for a long time then release it.
• HOLD: hold down the button to check the status of radio
or adjust the radio's parameter.
You may operate the side buttons by pressing SHORT or
to activate one of the features.
All manuals and user guides at all-guides.com
lighting
lighting
flashing
RX with CTCSS or DCS code
lighting
3
Indication
TX
RX
"GREEN"
flashing
matched
SHORT SHORT or LONG
4 of 52