Selecting Tracks; Pausing Playing; Previewing All Tracks; Repeating The Same Track - B52 marine BMC 1012 Manual Del Propietário

All manuals and user guides at all-guides.com
OPERATION
If a CD/MP3/WMA disc is already inserted in
the driver:
Keep pressing MODE button (6) shortly until
the CD mode display appears.

SELECTING TRACKS

Press button (16) or
to move to the previous track or the
following track. Track number shows on
display.
Hold button (16) or
reverse or fast forward. Disc play starts from
when you release the button.

PAUSING PLAYING

Press button (20) to pause CD player.
Press it again to resume play.

PREVIEWING ALL TRACKS

Press SCN button (21) to play first several
seconds of each track on the current disc.
Press again to stop intro and listen to track.

REPEATING THE SAME TRACK

Press RPT button (22) to continuously repeat
the same track. Press it again to stop repeat.

PLAYING ALL TRACKS IN RANDOM

Press SHF button (23) to play all tracks on CD
in random order. Press again to cancel the
function.

EJECTING A DISC

Press button (7) to slide down the
removable faceplate, then press the
button (4) to stop CD playing and eject the
disc from the disc slot (5).
SPECIAL FUNCTIONS FOR MP3/ WMA DISC
1) SELECTING DIRECTORY UP/DOWN
Press DIR- button (24) or DIR+ button (25)
to select directory downward or upward. If the
MP3 disc does not contain any directory, there
is no function of pressing DIR- button (24) or
DIR+ button (25).
2) SELECTING TRACKS BY AS/PS /Navi-SCH
BUTTON
AS/PS/Navi-SCH button (18) is assigned as
button (17)
button (17) to fast
10
Digital Audio Mode selection button in MP3
operation.
When pressed, it is activated as selecting
each mode of Digital Audio.
"Searching track directly" => "Searching
Directory or File Name"=> "Navigation" from
root by tune/seek/track buttons => "Naviga-
tion" from current directory by tune/seek/track
buttons.
• Searching Track Directly
Press AS/PS button (18) for one time. It
enters into "Searching track directly" in Digital
Audio CD.
The unit searches the track selected the
volume +/- buttons (12&11).
If selected three digits, the unit searches the
track at once. If selected one or two digits,
the unit wait for BND/LOUD/ENT button (13)
for seconds. The unit searches the track after
few seconds, even if the enter button is not
pressed.
• Searching Directory or File Name
Press AS/PS button (18) for two times. It
enters into "Searching Directory or
File Name" in Digital Audio CD.
The unit searches files and directories that
have the same character which is inputted by
the user pressing the
corresponding buttons listed on the Table 1
below.
Explain as follows:
- Use the volume +/- buttons to select the
characters A to Z, blank, 0 to 9, _, -, +.
- Press SEL button (10) to confirm entry of
each characters.
- Press BND/LOUD/ENT button (13) to start
the title search.
In case the selected title is a directory name,
display will show (' '), then