Problem Solving; Specifications - GBC B1 Manual De Instrucciones De Operación

6. PROBLEM SOLVING

Problem
No power, won't punch
Punched holes not aligned with
the edge of the paper
Sheet jamming repeatedly at
die set area.
Insert Chip tray message on the
LCD interface.

7. SPECIFICATIONS

Punch and Crease US Sizes
Sheet Size and Edge
LTR LEF
LEF- Long Edge Fed
SEF- Short Edge
LTR SEF
Fed
Legal SEF
P/C
P- Punch only
C- Crease only
11x17 SEF
DP – Double Punch
9" x 12" SEF
Width and Length in
9" x 12" LEF
mm
12" x 18"
SEF
12.6" x 19.2"
13" x 19"
13" x 19.2"
ISO sizes
A4 LEF
A4 SEF
A5* LEF
A3 SEF
SRA4 SEF
SRA4 LEF
SRA3 SEF
Multi Function Professional Puncher – B1
Probable Cause
Power cord not attached to back
of machine or not properly
plugged into the wall.
Power On/Off Switch not
activated.
Follow instructions on die set
labels to properly configure the
die for a specific sheet size
Remove the die-set, inspect the
die throat to see if there is any
stuck paper chad.
Make sure the Chip tray is fully
inserted.
P/C DP Width Length
P No 279.4 215.9
Yes 215.9 279.4
No 215.9 355.6
Yes 279.4 431.8
P No 228.6 304.8
P No 304.8 228.6
C No 304.8 457.2
C No 320.0 487.7
C No 330.2 482.6
C No 330.2 487.7
P/C DP Width Length
P No 297.0 210.0
Yes 210.0 297.0
P No 210.0 148.5
Yes 297.0 420.0
P No 225.0 320.0
P No 320.0 225.0
C No 320.0 450.0
Tab Stock
Paper Stock
Paper Bypass Mode
Sheet size
Punch Capacity
Power Supply
Electrical Amps and
Frequency
Safety Certification
Dimensions
Weight
Shipping Weight
Manufactured
* A5 size punch is out of specification for certain
printer configurations.
US Sizes
LTR, with 3, 4, 5, 8, 10, 12, 25*,
26*, 27* tabs: 160gsm – 300 gsm
ISO Sizes
A4, with 5,10, 12, 25*, 26*, 27*
tabs: 160-300gsm
Punch Dies
Plain: 75gsm - 300gsm
(20# bond to 110# cover)
Coated: 118gsm - 300gsm
(32# bond to 110# cover)
Crease Dies
Plain & Coated: 157gsm – 300gsm
(90# index to 110# cover)
Paper sizes and stocks same as
printer
Single Sheet
115V, 60Hz, Single Phase
115V; 3.8A; 60Hz
cULus
L: 795mm; W: 445mm; H: 1040mm
L: 31.5"; W: 17.5"; H: 41"
102 kg , 225 lbs
135 kg , 298 lbs
Assembled in Taiwan
EN
10