Clear Memory - bbluv Ora Manual De Instrucciones

Orä
EN
CONTROL THE ORÄ SOUND
To mute: Turn on the thermometer
on the sound button
To unmute: Turn on the thermometer
seconds on the sound button
disappear from the screen.
SWITCHING FROM METRIC READING (°F/°C)
Turn on the thermometer
button mode up and down. The symbol will change on the screen.
E
SAVE A READING
1. Measure the temperature wanted.
2. Press once on the Memory button
will sound to confirm save.
3. Keep saving on the first, all previously saved data will be pushed
back, meaning 01 will become 02, 02 will become 03, etc...
NOTE: The memory function is only available with forehead and ear mode. The thermometer will not save readings
made with the object mode.
RETRIEVE READINGS
1. Turn on the Orä
appear on your screen for the most recently saved reading.
After 2 seconds, the latest saved reading will appear.
2. To view older readings, press on the memory button again.
3. When the maximum number of records is exceeded, the oldest
memory data will be overwritten.
NOTE: The readings are saved from most recent to oldest, being 01 the most recent saved reading.

CLEAR MEMORY

To clear all the memory data, Turn on the thermometer
the battery cover
I
completely. The Öra will ring a long beep. Reconnect the battery and close the
cover. The screen will turn red, which indicates the memory is rest.
8
and immediately press and hold 3 seconds
B
. The mute symbol will appear on the screen
G
and immediately press and hold 3
B
. The Öra will beep once and the mute symbol will
G
and switch the metric unit by moving the " °C/°F "
B
and press the Memory button
B
and disconnect one of the batteries without removing it
to 01. If the sound is on, a beep
G
. " 01 " will
G
, slide open
B
.