IVIGO EPK4550M05 Manual Del Usuario página 20

Digital Electric Panel Convector Heater
SAFETY LOCK BUTTON
ON/OFF BUTTON
TEMPERATURE
DECREASE BUTTON
Switching on the Unit
Put the plug in a grounded socket to operate your appliance. Bring the On/Off switch ( )
(Figure l.) ON position (You will see the button on "I" position). Push the On/Off ( ) button of
your appliance for a short while. The unit will turn on. You will see the room temperature on the
Indicator Display when the appliance turns on.
NOTE: You can watch the product how to use video in our web adress
at www.ivigo.com or type "ivigo/vigo heater video" on the internet.
Increasing or reducing the temperature
You can adjust the temperature with the temperature increase ( ) or reduce ( ) pushbuttons
on the right and left sides of the On/Off button. If you want to increase or reduce the temperature
push the relevant button (for increasing ( ) button and for decreasing ( ) button) until the
required temperature is provided. Since the new adjusted temperature will be provided within a
specific period of time, actual room temperature will be displayed until the requested temperature
is provided. The unit will increase or decrease the power thereof until the adjusted temperature is
provided. (See Power Consumption Indicator).
20
Figure 14. Electronic Control Panel
INDICATOR DISPLAY
POWER CONSUMPTION
INDICATOR
TIMER SETTING BUTTON
(TIMER)
TEMPERATURE INCREASE
BUTTON