Safety Lock; Turning Off The Appliance - IVIGO EPK4550M05 Manual Del Usuario

EN
Programming the Daily Timer / Turn on timer
Turn on timer covers a period of forty-eight (48) hours. The indicator display 23 will be set to zero
if the program memory is set for more than forty-eight (48) hours. E.g. you are leaving your house
and want the appliance to operate before you come home. In this case the plug must be placed in
the socket and On/Off switch ( ) (See Figure l.) has to be on and the on/off button should be off.
You have to push the timer setting button ( ) without pushing the On/Off button ( ). You have
to keep the button pushed until the hour requested for the commencement of the operation of the
appliance appears on the screen. When the setting is completed a warning light will appear on the
indicator display and will shine until the appliance starts to operate. The unit will run automatically
on the set time automatically and will start heating. If you want to reset the timer you have to push
the button ( ) to on position and then off again.
Turn off timer
Turn off timer is a function for turning off the appliance automatically when the appliance is
working. Turn off timer can be set up to eight hours. You have to push the timer setting button
( ) until the hour requested to stop the operation of the appliance appears on the screen. When
the setting is completed a warning light will appear on the indicator display and will shine until
the appliance starts to operate. This light will be on until the appliance is off and the appliance will
turn off automatically on the set time (hour) seen on the indicator display. If you want to reset the
timer you have to push the button ( ) to off position and then on again.

Safety lock

If you keep pressing the safety lock button ( ) for a short period (about 2-3 seconds) while your
device is operating, the code "LO" -short for LOCK- appears on the screen. Buttons on the control
will not function if the unit is locked. In order to re-operate the control panel buttons, you again
have to press the turn on safety lock button ( ) for a short period (about 2-3 seconds) and the
code "UL" -short for UNLOCK- will appear on the screen. After appearance of this code the buttons
will be ready for general use.

Turning off the Appliance

If you push the power button ( ) 3-4 seconds appliance will turn off. Besides you can turn off your
appliance by pushing to On/Off switch ( ).
Note: The unit will keep the turn on timer or turn off timer programs in its memory during a power
failure and when power is restored it will run the program and keep working in normal conditions.
If you want to reset the timer you have to turn off the power button ( ) on the display panel.
21