5. Screw the plastic fastener to the wall with the Ø 5.5 x 50 mm screw.
6. Screw the two brackets for supporting the product and the plastic fastener to the hori-
zontal tube of the product like in Figure 1 with the Ø 6 x 35 mm screw.
7. Insert what you have assembled in Section 6 into the plastic piece. Fix well with the Ø 2.9 x
9.5 mm screw.
8. Place the cover on the piece supporting the product.
Nº.
1
Ø10 x 45 mm rawl plug
2
Bracket
3
5.5 x 50 mm screw
4
Plastic bracket with M6 nut
5
Bracket head
6
Ø 6 x 35 mm screw
7
Cap
8
Ø 2.9 x 9.5 mm fixig screw
9
Product
4. MAINTENANCE & CLEANING
The product does not require any maintenance. We recommend cleaning the product (back,
bottom of the product, etc.). Do not use abrasive substances on the product, clean it with
a damp cloth and neutral pH soap and the screen with a dry cloth. Before carrying out any
cleaning operation, make sure that the product is switched off and at room temperature.
5. EUROPEAN REGULATION (WEEE) 2012/19/EU
Based on the European regulation 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE), these appliances cannot be thrown in the usual council bins; they must be collected
selectively to optimise the recovery and recycling of the components and materials that
make them up, and reduce the impact on human health and the environment. The crossed-
out wheelie bin symbol on a horizontal bar is marked on all ROINTE products to remind the
consumer of the obligation to separate them for separate collection. The consumer should
contact the local authority or the retailer for information regarding the correct disposal of
their product.
ITEM
ZOCCA CABLE ELECTRIC TOWEL RAIL
EN
11