Parts List - osann Vamos Manual De Instrucciones

EN

Parts list

a) Sports buggy attachment
b) Shoulder pad
c) Guard bar
d) Belt lock
e) Leg support
f) Footrest
g) Front wheel
h) Push handle
i) Sun visor
j) Frame
k) Release button for guard bar
l) Rear wheel
m) Locking lever for front wheel
n) Sports buggy attachment cover
o) Button for removing the sports buggy
attachment
p) Button for adjusting the leg support
q) Button for adjusting the height of the push
handle
r) Lever for adjust the seat position
s) Shopping basket
t) Parking brake
u) Carrycot carrying handle
v) Carrycot
w) Carrycot cover
x) Sun visor
y) Carrycot cover
z) Button for adjusting cover
aa) Carrycot adapter set
ab) Carrycot adapter set (optional, may be
available as an accessory)
1) Unfold the frame
Unfold the frame by pulling the push handle upwards
until you hear a click. Check that the frame is fully
engaged.
2) Mount the front wheels
Insert the front wheels into the front axle until you
hear a click. Check that the front wheels are fully
engaged. To remove the front wheels again, press
the button on the front axle (A) and pull the wheels
out of the axle.
3) Mount the rear wheels
Insert the rear wheels into the rear axle until you
hear a click. Check that the rear wheels are fully
engaged. To remove the rear wheels again, press
the button on the underside of the respective rear
axle (A) and pull the wheels out of the axle.
- 18 -
4) Guard bar for sports buggy attachment
Insert the guard bar into the openings provided on
the sports buggy attachment until you hear a click.
Check that the guard bar is fully engaged. To re-
move the guard bar again, press the button (A) on
both sides of the guard bar and pull it away from
the sports buggy attachment. The guard bar can
only be opened and unfolded on one side to make it
easy to put your child in.
5) Sports buggy attachment
Insert the sports buggy attachment into the de-
signated sockets on the frame until you hear a
click. Check that the sports buggy attachment is
fully engaged. The sports buggy attachment can
be mounted on the frame either in the direction
of travel or facing the pushchair. To dismantle the
attachment again, press the buttons (A) on both
sides of the attachment and pull it off the frame.
6) Assemble the carrycot
First remove the mattress. Open the inner zip of the
carrycot so that you can remove the inner cover.
Push the metal brackets from the inside to the out-
side into the fi xings so that the carrycot opens up.
Check that the metal brackets are fully engaged in
the fi xing points. Reinsert the cover and close the
zip. Put the mattress back in. Model-dependent:
The front sun visor on the cover of the carrycot can
be removed for transport reasons. Reattach it to
the cover using the zip fastener.
7) Sports buggy attachment belt system
The harness system is individually adjustable in both
the shoulder and pelvic areas. In addition, there are
three height settings. To adjust the shoulder straps
to the lower positions, please thread them through
the sewn loops.
Babies and toddlers under 6 months: Please use
the lowest height setting and thread the side pelvic
straps through the loops in the pelvic area.
8) Front wheel swivel function
You can lock or swivel the front wheels using the lever
on the front wheel.
9) Brake
Operate the brake (A) at the front point (1) to lock it
or at point (2) to release it.