All manuals and user guides at all-guides.com
Divar 2 external CD/DVD writer | Installation Manual
EN | 9
Front panel
Power LED
Read/Write LED
Open / Close
Supported Media
The external CD/DVD writer supports the following types of media:
DVD+RW, DVD+R, CD-R and CD-RW.
The CD/DVD writer might not support all CD and DVD media. For a list of approved
media (not supplied by Bosch), please visit www.boschsecuritysystems.com. After making
an archive with the CD/DVD writer, we advise you to test the CD or DVD media to
verify that the archived data can be played back on a PC.
Installation Environment
Mounting: The external CD/DVD writer is supplied as a desktop unit.
Ventilation: Ensure that the location planned for the installation of the unit is well
ventilated. Take note of the locations of the cooling vents in the unit's enclosure and
ensure that they are not obstructed.
Temperature: Extremes of heat or cold beyond the specified operating temperature
limits may cause the unit to fail. Do not install the unit on top of hot equipment.
Power Supply: Ensure that the site's AC power supply is stable and within the rated
voltage of the unit. If the site's AC power is likely to have spikes or power dips, use power
line conditioning or an uninterruptable power supply (UPS).
Achive Player software
When you have successfully connected your external CD/DVD writer to the Divar, verify
that the writer has been detected in the Divar's Disk Manager / Storage Setup menu,
insert the supplied CD and load the latest version of the Achive Player software into the
Divar according to the instructions that appear on your monitor screen.
Bosch Security Systems