PNI CS101 Manual De Usuario página 7

returns. If you touch the panel too soon, the switch may not work
properly.
Troubleshooting
The bulb lights up or flashes.
If the light does not turn on, dims or flashes, please connect
the capacitor in the package in parallel with the light bulb
between the Null wire and the L1/L2 wire according to the
wiring diagram.
The switch is installed but the button (s) do not react.
First, make sure that the wires are connected correctly
according to the wiring diagram. As a specialist, you can check
the wiring according to the diagram with a measuring device.
Make sure the bulb is plugged in and functional.
a. Disconnect the power supply for 1 minute.
b. Reinstall the switch and glass panel.
c. Turn on the power.
d. Wait for 10 seconds and then tap the button to turn on the
7