PNI CS101 Manual De Usuario página 8

light.
Warnings
• Installation should be performed by authorized personnel
only.
• Do not install the switch in factories or rooms with strong
electromagnetic interference, such as computer tomography
or magnetic resonance imaging rooms in hospitals.
• For the correct operation of the switch, use only these types
of light bulbs: LED, incandescent, halogen, energy-saving
bulb, and fluorescent with electronic driver.
• The switch does not work with fluorescent lamps (neon) with
ballast with magnetic inductance.
• Install the power switch with the power turned off.
• Do not install the switch in a humid environment.
• Do not exceed the maximum load (10A).
• Please follow the installation instructions.
8