Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
26.11.2018
3.
Insert Ø 10mm wall plugs into the holes drilled as A, B, C, D,
and screw down the 5.5 x 60 screws (9) at the points A + B,
in such a way as to remain 5mm space between the screw
head and the wall (Fig. 11).
4.
Affix the hanging plates of the cooker hood on the body of
the cooker hood with M5x35 bolt (3) (Fig. 11).
5.
Hang the hood from its hanging plates on the wall at points
(A, B). If the hood is not parallel, position its shape to parallel
by tightening or loosening M5x35 screw (3).
6.
Tighten A + B fixing screws on the wall, and completely
secure the product at point C.
7.
Make the air outlet connection of the product
HOOD USER GUIDE
ASSEMBLY OF PRODUCT
23
Publicidad
Tabla de contenido
