Assembly Of Sheet Metal Flues - FRECAN M211 Guia Del Usuario

ASSEMBLY OF SHEET METAL FLUES

13 ASSEMBLY OF SHEET METAL FLUES
Fig. 12
24
1- Inner Flue
2- Flue Connection Plate Fixing Screws
3- Flue Connection Plate
The outer and inner sheet metal flues are assembled one within
the other.
The cooker hood is set in the midst, and then the flue connecting
plate (3) is directly affixed to the wall, under the cover or mark the
points E and F. ()
Drill points E and F with Ø6mm drill bit, and insert Ø6mm and
plastic dowels. Insert the flue connection plate with 3,9X22 screws
().
Affix the inner flue to the flue connection plate by pulling it upwards
(Fig. 12/2).
HOOD USER GUIDE 26.11.2018