Package Contents; Maintenance And Cleaning - PROZIS Pulsar Manual Del Usuario

EN
antenna cables and external antennas) should not be used within 30 cm (12 inches) of the
device, otherwise, performance may be affected.
• Do not modify this device.
This product is intended for indoor use only.
User Manual

PACKAGE CONTENTS

• 1 × Prozis Pulsar Smart Scale with Heart Rate Monitor
• 4 × LR03 Batteries
• 1 × Quick Guide
Product description: see page 2, figure A
1. Pulsar Smart Scale with Heart Rate Monitor
INSTRUCTIONS
APP AND BT SETUP: SEE PAGE 2, FIGURE A
2. Download the Prozis Go app from the Apple App Store® or Google Play Store®. Turn on
BT and GPS (Android) or BT (iOS).
For future data synchronization, follow these steps:
Open the App > Swipe down > Sync prompt will appear
Note: Do not attempt to pair the device through your phone's BT settings.
3. Make sure the device is powered with 4 AAA batteries inside.
4. Place the scale on a flat surface.
5. Stand on the scale, open the Prozis Go app, and select Add New Device.
6. Select Pulsar as your new Prozis device and follow the app's pairing instructions.
8
MEASURING TIPS: SEE PAGE 2, FIGURE B
• Stand straight, barefoot, and with clean feet on the scale.
• For the most accurate and consistent measuring results, use the product during the day and
try to maintain the same measuring conditions. Avoid measuring:
• During or immediately after intense exercise.
• During or immediately after meals.
• Immediately after a shower, bath or sauna.
• While having a fever.
• In combination with heavy alcohol consumption.

MAINTENANCE AND CLEANING

Switch the product off and remove all plugs before cleaning!
When cleaning the components, do not use aggressive or abrasive cleaning agents or
materials such as scouring milk or steel wool. These could damage the upper surface of the
appliance!
Protect the device from water drops and water spray. Only use a clean, dry cloth for cleaning
our device and never use any corrosive liquids. Use a slightly damp cloth and a mild cleaning
agent to remove stubborn dirt.
Make sure moisture does not enter the product during cleaning to prevent damage to the
product and related repairs.
STORAGE
When no longer using the device, store the product in a dry environment, protected from
dust and direct sunlight.
Remove batteries if product is not used for an extended period of time.
Store your appliance in the original case provided.
Troubleshooting
Some issues that arise may be solved by the user. If the problem persists after having tried
the following solutions, please contact Prozis customer service.
PROBLEM CAUSE
No user information.
Display shows .
- -
Display shows . Impedance error.
Fr
Display shows . Heart rate measurement failed.
Pr
EN
SOLUTION
Connect to the APP to synchronize user
information before measuring.
The barefoot test measures fat during the
process without moving the feet.
The barefoot test measures your heart rate
without moving your feet.
9