EN
INSTRUCTIONS FOR USE
-Thoroughly unwind the cord before plugging it
in.
-Plug in the device.
How to make bags from a sealing roll:
- Cut the size you want.
-Seal at one end to create a bag.
-Open the lid of the vacuum machine by pressing
bothside buttons
-Insert the open top of the bag into the sealing
gasket without introducing the bag in the vacuum
compartment. To make sure the sealing is
performed properly the bag should not be creased
or folded.
1
-To close the lid press the device on both sides
until the sealer is properly locked.
-Press the Seal button and the sealing mode will
be activated, blue LED indicator on control panel
will turn on.
-When the sealing strip cools down, blueLED
8