Tabla de contenido
Publicidad
STEP 12
Assure that our unit is square.
Distance from corner to corner
must be equal as shown.
systembuild.com
5
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
Carefully turn your unit on its front side.
Attached the back panel as shown nailing straight into the raw edges.
(x40)
K
B
raw
surface
19
5
E
Flush bottom edge of the
back panel with the bottom
edge of bottom (E).
You
Tube
Publicidad
Tabla de contenido
