Control Panel; Ice Size Adjustment Guide - Summit Commercial BIM-44 Manual Del Usuario

Control panel:

Description of LEDs and buttons:
Bin Full (Red) LED
1.
When this is lit, the ice storage bin is full of ice or there is something blocking the
bin-full probe. The unit will stop working. When ice cubes are removed from the ice
storage bin, freeing the bin-full probe, the red LED will remain flashing for 3 minutes,
then the unit will restart and return to the ice making mode.
Ice Making(Green) LED
2.
When this is lit, the unit is working in the ice making mode controlled by a
temperature probe on the evaporator. When the green LED flashes, the unit is working
in the ice making mode controlled by a fixed timer.
3. Ice Harvest (Yellow) LED: Ice harvest indicator light
When this is lit, the unit is working in the ice harvest mode controlled by the ice-full
probe.
When both the green and yellow LEDs are lit, the unit is in the cold preservation
mode.
4. Mode button: Mainly for service. When this is pressed, the ice making mode changes
to the ice harvest mode or vice versa. The mode can be judged from the status of the
green and yellow LEDs.

Ice Size Adjustment Guide:

1. Press and hold the "Clean" button and the "Mode" button together for at least 3
seconds. The unit will enter the Ice Size Adjustment mode. The "HARVEST" LED
(yellow) will be blinking continuously during the ice size adjustment.
2. While in the Ice Size Adjustment mode, press the "Clean" button or the "Mode"
Bin full indicator light
:
Ice making indicator light
:
22