Zeiss SYCOP 3 Manual Breve página 11

SYCOP 3
The SYCOP 3 system control panel combines four
controls in one unit:
Joystick (Fig. 2/1) permitting the two principal
−
functions of the microscope to be controlled in
a combined way: zooming and focusing
Scroll wheels (Fig. 2/2) facilitating the fine
−
focusing of the microscope image in greater
magnifications
Pushbuttons (Fig. 2/3) arranged in six pairs to
−
allow additionally
functions to be individually controlled
Touchscreen (Fig. 2/4)
−
microscope functions to be controlled and the
overall system to be monitored
The SYCOP 3 has been designed for one-hand
operation of the microscope. This allows the
operator to use all the principal functions without
having to interrupt viewing through the eyepieces.
The SYCOP 3 can be placed to the right or left of
the microscope, independent of the location.
The EMS 3 controller is required for the SYCOP 3.
09/2017
ESSENTIAL OPERATION CONTROLS
selectable microscope
allowing specific
435611-6044-008
Fig. 2 Overview of Operation Controls on
the SYCOP 3
ZEISS
9