Network Settings; Mechanical Installation - Zycoo Ei Serie Guía De Instalación Rápida

Network Settings

1
Connect the power supply and network cable or PoE cable properly.
After the device is started, press and hold the press button for 5 seconds, release the but-
ton, and the device will broadcast the device's IP address. (For the Ei-D05 model, you
need to press the second from the top button, the one closer to the speaker).
2
The device defaults to DHCP. If the DHCP failed and no IP address is obtained, the default
IP address is 192.168.1.101.
3
Insert the device's IP address in the browser to access the device's web interface, and use
the default login credentials admin/admin to sign in.

Mechanical Installation

3
1
English
60 mm
90 mm
2
1