Descargar Imprimir esta página

Amazon Basics B00GUTY3DK Manual De Instrucciones página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 63
Pairing your speaker with a device
1. Turn ON your speaker. A tone sounds, the LED blinks
quickly, and your speaker enters pairing mode.
Note: If you do not hear a tone and the LED doesn't blink
quickly, press and hold the function
seconds to put your speaker in paring mode. A tone sounds
and the LED blinks quickly.
2. Turn ON your Bluetooth device (like a phone or tablet).
3. On your device, locate your Bluetooth settings and turn on
Bluetooth.
4. In Bluetooth Settings, scan for devices if necessary, then
select Amazon_BT2 from your device's list. The LED
stops blinking and lights blue. Your device and speaker
are paired and your speaker is ready to use.
button for 1 to 3
5

Publicidad

loading

Este manual también es adecuado para:

B00jzvpke6B00jzvpihaB00jzvpl72B00jzvpjd8