Modine EGK Serie Manual Tecnico página 64

• momentary but significant leakage of fluid from the model or other parts of the installation;
• feeling of discomfort by personnel;
• activation of CO
2
In the event of operators feeling unwell, move away from the system and contact a doctor immediately. All
operations must be carried out by qualified personnel. The use of PPE is recommended (see Section 12).
Ensure adequate ventilation of the working environment.
11.17 Always take into account the working pressure of the system. In particular, in the case of CO
working pressure can reach 130 bar: in the event of a rupture, there is a risk of injury to persons or damage to
property due to the projection of debris, even from a great distance. Before carrying out any work, always make
the system safe as per current regulations. The use of PPE is recommended (see Section 12).
11.18 In the event of a leak of refrigerant fluid, check that it has not penetrated into rooms below or adjacent to the
place of installation: secure the rooms as per current regulations. In the case of CO
tendency of the fluid to stratify near the ground.
11.19 During the dismantling and scrapping phases, make sure to use the appropriate personal protective equipment
(see section 12).
Ensure complete draining of the fluids and their proper disposal. Pay particular attention to sharp edges.
64
www.modinecoolers.com
or other refrigerant alarm sensors.
systems, the
2
systems, consider the
2